This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.


Power transmission in a compact design

In modern machines and systems, the complexity and associated costs for networking and control technology are increasing, without more space being made available for them. With the reworked Heavycon D7 connector range, Phoenix Contact is offering power transmission in a compact design.

The metal housings have been made around 40% lighter. In spite of their small design, there is sufficient cable space for high-position cables or large cross sections. The conductive surface and conductive seals offer good EMC properties when combined with a suitable screw connection. The panel mounting bases are secured with four screws. This means they can handle extreme forces and speeds. Temporarily used interfaces can be reliably sealed with securely fastened caps.

A new feed-through housing can optionally be mounted from the front or rear side. It also provides you with IP and EMC-compliant protection on the connection side. The plastic housings have also been reworked. The integrated cable gland reliably seals small and large cable diameters. A large range of contact inserts ensures that signals and power of up to 40 A can be safely transmitted.

Contact Details and Archive...

Print this page | E-mail this page

Electrical Products