This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.


Eliminating need to splice downhole cables

The BIW field attachable Packer Feedthru System launched by ITT Interconnect Solutions provides a faster method of passing power cables through packers.

Eliminating need to splice downhole cables

Consisting of a field attachable feedthru connector, a mating attachable cable connector, a cross-over adapter and related hardware, this new system allows the connector to be installed on the top side of a packer using a cross-over adapter, eliminating the need for splicing of downhole cables.

Potential stress on the cable is eliminated as the packer feedthru includes a completely variable threaded adjustment system, allowing vertical adjustment of up to three inches (76mm). When appropriate, it is possible to install the termination contacts on the cable conductors before the cable is passed through the packer. This may reduce the amount of work an installer is required to carry out in a vertical position over an open well.

Electrical specifications include: voltage ratings of 5000VAC; 140A current; pressure up to 5,000 psig and maximum conductor temperature of 350deg.F (175deg.C). The field attachable packer feedthru system has a maximum diameter of 2.6in (66.04mm), length above the packer with round cable is 26.4 to 29.5 in (672mm to 748mm), and with flat cable 30.4in to 33.4in (772mm to 848mm).

Contact Details and Archive...

Print this page | E-mail this page

Electrical Products