This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

BROWSE PRODUCTS
 

PIRs extend the energy saving options

Finder has announced additions to its 18 Series of PIR motion detectors supporting a variety of interior energy saving schemes. The compact 18.21 and 18.31 variants will meet the needs of higher ceiling, higher load switching applications and those requiring direct interface to a PLC or BMS.

Recess mounted, the flush fitting 18.31 suits suspended or plasterboard ceilings while the 18.21 is a low profile PIR for hard surface mounting.  Providing a 10 amp rated normally open volt free output, the detectors will switch loads at any voltage and are not restricted to 230VAC mains tasks.  24V ac/dc supply versions are also available for applications without a mains supply or where safe, low voltage operation is required.

With a 110º wide sensing angle and a reach of 2.8m, the 18.21-0300 and 18.31-0300 PIRs will handle all types of regular ceiling height applications.  For high bay or extended ceiling height duties, the 18.31-0031 PIR variant offers a much longer sensing range of up to 8m.
The Finder PIRs also offer an adjustable light threshold setting allowing operation to be varied according to ambient light conditions.  In addition, an enhanced light-on time adjustment of up to 35 minutes makes the PIRs well suited to HID lamp applications, which for reasons of preserving lamp life, place a restriction on the number of starts per hour.


Contact Details and Archive...

Print this page | E-mail this page

 
Electrical Products