Tridonic basicDIM RCL – a cleverly networked lighting management system
New from lighting control experts Tridonic is the basicDIM RCL, a cleverly networked lighting management system for control in single rooms that can achieve energy savings of up to 80%. basicDIM RCL is a digital control module for use with up to 25 DSI ballasts that controls the lighting levels on the basis of ambient light and presence.
Utilising up to four smartDIM sensors, Tridonic’s basicDIM RCL electronic ballasts can be regulated via ambient light and automatically switched off by means of motion or presence detection. Up to 20 basicDIM RCL units can be linked together via the dedicated Link Line to extend the presence detection area and the system also takes into account the decreasing light output of lamps with age and dirt in the luminaire. Desired daylight values can be disabled and therefore protected against unintentional change. BasicDIM RC lighting control devices can be installed in the luminaire or mounted externally with cable clamps. A rotary switch provides 16 predefined profiles and the required level of daylight is easily fixed with the aid of a removable jumper. The luminaires are switched on manually with an external push button connected to the basicDIM RCL or via presence detection. Switch off delay time and nominal illuminance can only be set directly at the basicDIM RCL device, making unintentional manual interference impossible. At the end of the delay and before completely switched off, the connected luminaires are dimmed down to an intermediate lower dim level. Tridonic develops innovative products that enable luminaire manufacturers, lighting designers, architects and end users to implement functionally and economically superior lighting solutions through close, value-driven, partnership-based cooperation.
Contact Details and Archive...