This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.

BROWSE PRODUCTS
 

Not just a cabinet

Author : J GALE

Many specification engineers, system integrators and panel builders focus their upfront electrical system design to build exclusively on functionality, here Rittal outline the processes involved. Read More

Many specification engineers, system integrators and panel builders focus their upfront electrical system design to build exclusively on functionality, concentrating on how it will perform within the specification outlined by the end user.

All too often the last thing to be taken into consideration in the electrical system integration is the system enclosure, future proofing, accessories and ancillaries. Choosing the right enclosure and its associated ancillaries for the application can have a huge impact on the overall performance and efficiency of the system’s operation and can significantly prolong the life of the installed equipment, save energy, utility costs and protect against unscheduled downtime. With careful consideration and the right information, the correctly specified system enclosure and ancillaries can truly become an asset for increased productivity and profitability for the panel builder and system integrators, through to the end user.

Anyone can make a cabinet since technically it is not the most challenging product to produce. Clean rooms or sophisticated test equipment are not essential, all that is needed is the ability to be able to cut, punch, fold, weld, paint, assemble and pack the product.

Great enclosures, however, solve problems. There is, after all, nothing more frustrating than trying to fit out a cabinet when the practicalities of applications have not been recognised in the finished product. For example, such as when having scrapped your knuckles for the fifth time on a protruding edge, standing on a corner angle and bending it because of a lack of inherent strength and snagged cabling on a sharp corner as it enters into the cabinet.

Enclosure manufacturers such as Rittal for example, do design not only for the present challenges and requirement of today’s market but also tomorrows. This is why new design tools that have been implemented at Rittal’s UK manufacturing site at Plymouth allow the modern cabinet designer to not only build in 3D in a virtual world but also to test. Using finite analysis, the enclosure concept can be tested under different forces and frequencies to determine potential weaknesses before any metal is cut. There is no replacement, however, for load testing in the real world and therefore conducting drop tests is essential to validate the virtual tests.

Linking the CAD with a state of the art laser cutting, Rittal can go from concept to prototype in under 15 minutes. Business demands faster reaction times and sophisticated design and prototyping tools are allowing us to do this.

Design is one thing, manufacturing quite another. The secret to good manufacturing can be summed up in the words ‘consistency, quality, and on time’. Automation is key to solving these three issues. Cabinets are no different, removing the human element, increases capacity and consistency and maintains quality. Automation comes with some restrictions such as ‘specials’, i.e. unusually placed holes with the cabinet painted green. This will typically be dealt with differently and will require a more labour intensive manufacturing process which at Rittal can be easily accommodated.

The slowest part of any manufacturing process is the paint line and ensuring that this is fully utilised is an exact skill of matching demand with multiple paint changes. Not a simple process, therefore having an onsite chemist is essential, especially when the paint line in the Plymouth factory is one of UK’s largest outside of the automotive industry. Each raw cabinet component is firstly cleaned using a phosphate spray that fully removes the oils from the metal surface, then gets dipped into a wet paint tank ensuring 100% coverage, which means that it has a greater resistance to corrosion. The dipped component then enters the epoxy powder coating line and by applying an electric current to the enclosure component we can create a magnetic field. If we then apply the inverse of the magnetic field to the paint particles, the powder paint effectively sticks to the cabinet and by varying the charge you can vary the paint thickness being applied. Once the component is coated, it is then put through an oven to ‘enamel’ it permanently. The powder coating not only provides a very efficient form of painting but where it is a dry powder means that it is easier to clean down the spray booth ready for a different colour.

Cabinets are then assembled to the customer specification and packed. Given that most damage occurs during transit of the enclosure from the manufacturing facility to the user, reducing the amount of transport is essential, not only to minimise the potential for damage but also the impact on the environment. Approximately 2000 products stored within the production facility allow a rapid delivery (next day) but also a lean route to the final customer. Packaging is a necessary evil and is expensive, so much design time and effort is spent ensuring that the packaging is not only fit for purpose, but also cost effective.


Contact Details and Archive...

Print this page | E-mail this page

 
Electrical Products